Front Door Window Regulator: Service and Repair

51 33 000 Removing And Installing / Replacing Power Window Regulator In Left Or Right Front Door







WARNING:
- Danger of injury.
- Carry out work on the power window regulator only when the power window motor is de-energized.







Necessary preliminary tasks:
- Remove front door window glass







Slacken bolt (1).
Tightening torque 51 33 3AZ.
Release screws (4).
Tightening torque 51 33 2AZ.
Unlock plug connection (3) and disconnect.

Installation note:
Holder (2) must be correctly seated on inner door panel rail.







Removal of power window regulator:
1. Feed out left-hand window lift rail
2. Feed out right-hand window lift rail







Installation note:
Make sure guide lug (2) of power window unit (1) is correctly seated in recess in door structure.







Finishing tasks:
- Observe notes on initialising power window regulator

Replacement:
Remove flat motor for power window unit.