31 00 ... Front Axle + Steering: Wheel/Chassis Alignment Check Must Be Carried Out After the Following Work

31 00 ... Front axle + steering: wheel/chassis alignment check must be carried out after the following work





Illustrations show F01/F02:
A wheel/chassis alignment check must be carried out after the following work:
^ Release of following screw/bolt connections:
^ Steering gear to front axle support (with identification no alignment check required, see Removing and installing steering gear)
^ Lower wishbone to front axle support
^ Track rod end to track rod

^ Replacement of following parts:
1. Front axle support
2. Steering gear
3. Swivel bearing
4. Lower wishbone
5. Track rod end
6. Track rod