Engine Valley Cover: Service and Repair

11 14 250 - Removing and installing/sealing rear coolant end cover (N63)





Special tools required:
- 11 4 470 11 4 470 Tool





Warning!
Danger of scalding!

Only perform this work after engine has cooled down.





Recycling:
Catch and dispose of drained coolant in a suitable container.

Observe country-specific waste-disposal regulations.





Necessary preliminary tasks:
- Remove flywheel 11 22 000 Removing And Installing/Replacing Flywheel
- Drain coolant





Release all screws in area (1).

Tightening torque 11 14 5AZ. Mechanical Specifications

Remove end cover.

Note:
Clean sealing faces with special tool 11 4 470.





Installation Note:
Replace profile seal (1).





Assemble engine.