Engine Valley Cover: Description and Operation

11 14 250 Removing and installing/sealing rear coolant end cover (N63)

Special tools required:





Warning!
Risk of scalding!
Only perform this work after engine has cooled down.





Recycling:
Catch and dispose of drained coolant in a suitable collecting vessel.

Observe country-specific waste disposal regulations.





Necessary preliminary work:
^ Remove flywheel
^ Drain coolant





Release all screws in area (1).

Tightening torque 11 14 5AZ.

Remove end cover.

Note:
Clean sealing surfaces with special tool 11 4 470.





Installation note:
Replace profile seal (1).





Assemble engine.