51 71 346 Removing and Installing/Replacing Right (Rear) Suspension Cross-Brace

51 71 346 Removing and installing / replacing right (rear) suspension cross-brace





Important!
Driving without the suspension cross-brace is not permitted. (risk of damage to the body).





Release expanding rivets (1) and remove cover (2).

Installation note:
Replace damaged expanding rivets.

Holder of cover (2) must snap into place in suspension cross-brace during installation.





Release screw (1).

Tightening torque 51 61 1AZ.

Remove suspension cross-brace (2).

Installation note:
Make sure suspension cross-brace (2) is in correct installation position.

Replace screw (1).

�O�/�~�/: