51 71 345 Removing and Installing/Replacing Left (Rear) Suspension Cross-Brace

51 71 345 Removing and installing / replacing left (rear) suspension cross-brace





Important!
Driving without the suspension cross-brace is not permitted. (risk of damage to the body).





Release expanding rivets (1) and remove cover (2).

Installation note:
Replace damaged expanding rivets.

Holders (3) must snap into place in suspension cross-brace when cover (2) is installed.





Release screw (1).

Tightening torque 51 61 1AZ.

Remove suspension cross-brace (2).

Installation note:
Make sure suspension cross-brace (2) is in correct installation position.

Replace screws (1).

�O�/�~�/: