17 22 010 Removing and Installing/Replacing Gearbox Oil Cooler For Automatic Transmission

17 22 010 Removing and installing/replacing gearbox oil cooler for automatic transmission (N63, N74)





Important!
Risk of scalding!
Only perform this repair work after engine has cooled down.





Necessary preliminary work:
^ Drain coolant.
^ Remove fan cowl.





Recycling
Catch and dispose of drained coolant in a suitable container.

Transmission oil emerges when engine oil lines are detached from transmission oil cooler.

Catch and dispose of escaping transmission oil in a suitable container.

Observe country-specific waste disposal regulations.





Release and disconnect coolant hoses (1).

Unlock transmission oil lines (2) and detach.

Remove transmission oil cooler (3).

Note:
When replacing transmission oil cooler (3), modify thermostat insert (4).





Note:
Assemble engine.

Check oil level in automatic transmission. If necessary, top up automatic transmission fluid.