64 11 216 Replacing Blower For Automatic Rear Air-Conditioning System

64 11 216 Replacing Blower For Automatic Rear Air-Conditioning System







Necessary preliminary work:
- Remove controller for rear air conditioning blower

NOTE: For purposes of clarity, the automatic rear air-conditioning system is shown in the following operations with the component removed.







Pull condensation water drain hose (1) in direction of arrow out of gaiter.

Installation:
Condensation water drain hose must be inserted up to marking in gaiter.
Unfasten plug connection (1) and disconnect.
Snap associated plug housing out of blower cover (3).
Release screws (4).
Remove blower cover (3).
Feed out motor supply lead incl. grommet (5).







Release screw (1), snap out blower motor (2) in direction of arrow and remove in upward direction.