Sunroof / Moonroof Interior Trim Panel: Service and Repair

54 12 136 Removing And Installing/Replacing Sliding Trim For Glass Slide/Tilt Sunroof







Necessary preliminary work:
- Remove glass slide/tilt sunroof cover
- Close sliding trim completely







Release screws (1).
Tightening torque 54 12 03AZ.
Remove sliding strips from guide rail.

Installation note:
Make sure rubber lugs are correctly seated on sliding strips.

Remove sliding trim towards front.







Installation note:
Correctly insert front sliding strips into driver (drive cable).







Installation note:
If sliding trim is difficult to move, apply a light coat of Renolit RHF1 (manufactured by Fuchs) to guide duct.