51 71 345 Removing and Installing/Replacing Left/Rear Suspension Cross-Brace

51 71 345 - Removing and installing/replacing left/rear suspension cross-brace





Important!
Driving without the suspension cross-brace is not permitted. (Risk of damage to the body).





Release expander rivets (1) and remove cover (2).

Installation Note:
Replace damaged expander rivets.
Holders (3) must snap into place in suspension cross-brace when cover (2) is installed.





Release screw (1).
Tightening torque 51 61 1AZ [1][2]Specifications.
Remove suspension cross-brace (2).

Installation Note:
Make sure suspension cross-brace (2) is in correct installation position.
Replace screws (1).