72 11 096 Removing and Installing/Replacing Rear Left or Right Lower Strap

72 11 096 Removing And Installing/replacing Rear Left Or Right Lower Strap (belt Buckle)







Necessary preliminary tasks:
- Remove left rear seat







Installation:
- Microencapsulated screws (Loctite) must be replaced and may not be reused
- Screw connection must be completed within 20 minutes (start of curing)
- Microencapsulated screws must not be retightened
- Clean thread of nut beforehand in event of repeated use







Seat belt buckle, right:
Detach cover (1).

Release screw (2).

Tightening torque 52 26 08AZ.

Pull folding cover forward and lift up to remove.







Release screw (1).

Installation:
Replace screw (1).

Tightening torque 72 11 22AZ.

Remove seat belt buckle.

Installation:
Seat belt buckle is coded to prevent incorrect installation.







Seat belt buckle, left:
Release screw (1).

Installation:
Replace screw (1).

Tightening torque 72 11 22AZ.

Remove seat belt buckle.

Installation:
Seat belt buckle is coded to prevent incorrect installation.

�Ҋ":

v5�":