61 33 055 Removing and Installing/Renewing Right Fanfare Horn

61 33 055 Removing and installing/replacing right fanfare horn







Necessary preliminary tasks:
- Remove front bumper panel







Disconnect plug connection (1) and release nut (2).
Remove fanfare horn (3).







NOTE:
For replacement on vehicles with production dates up to 03/2011, the connector position (3) may deviate by approx. 120° for the installation of a new fanfare (2B).

A: Fanfare up to 03/2011
B: Fanfare from 03/2011
Holder (1) must also be replaced. (Note additional work.)







Additional work for replacement with holder:
Unfasten screws (2). Remove right air duct (1).







Release screws (1). Drill out rivet (2) from ACC sensor (3). Remove support (4).

IMPORTANT:
Risk of damage.
The holder of the ACC sensor must not be bent.







Disconnect plug connection (3). Drill out rivet (1). Remove fanfare with holder (2).