11 61 065 Removing and Installing/Replacing Left Intake Plenum

11 61 065 Removing and installing/replacing left intake manifold (N63)





Necessary preliminary work:
^ Remove left injection pipe
^ Remove throttle valve
^ Release screws on intake manifold from above without fail before lowering front axle
^ Secure engine in installation position
^ Lower front axle, releasing screws on engine mount first
^ Release power steering pump and place to one side
^ Universal joint with corrugated tubing





Detach engine ventilation hose (1).

Disconnect plug.

Unscrew nuts (2).

Tightening torque: 11 61 1 AZ.





Release throttle valve (1).

Release bracket screw (2) on intake manifold.

Tightening torque: 11 61 2AZ.

Feed out intake manifold towards rear.

Installation Note:
Replace all profile seals.





Assemble engine and vehicle and

Check intake system for leaks.