51 16 181 Replacing Centre Console Carrier

51 16 181 Replacing Centre Console Carrier







Necessary preliminary tasks:
- Remove complete centre console
- Remove rear centre console trim







IMPORTANT: Read and comply with notes on handling wiring harnesses and cables.







Unfasten screws (2).

Installation:
Replace self-locking screws (2).

Tightening torque 51 16 4AZ.
If necessary, disconnect plug connection from aerial for comfort access (1).







Release screws (1).

Installation:
Replace self-locking screws (1).

Tightening torque 51 16 4AZ.
Disconnect plug connection from rear compartment blower.







Unfasten screws (2).
Raise centre console carrier (3) slightly and pull out wiring harness.
Remove carrier.







Modify rear compartment air duct (2)
Modify all plastic nuts (1).

Installation:
Replace defective nuts.







Release screws (1) from front bracket (2) and remove bracket.

Perform additional work steps according to equipment specification:
Release screws (3) from front compartment blower (4) and remove blower.







Release screw (1) from aerial for comfort access (3) and remove aerial.
Modify plastic nut (2).

Installation:
Replace defective nut.

��!:":