Fuel Door Release Actuator: Service and Repair

67 11 555 Removing And Installing/replacing Actuator Drive For Fuel Filler Flap







Necessary preliminary tasks:
- Remove distribution box
- Remove right luggage compartment wheel arch panel .







Slacken screws (1)

Feed out servodrive (2) in direction of arrow and unlock and disconnect associated plug connection.







Installation:
Turn sleeve (1) with a suitable tool approx. 45° in direction of arrow and pull out of receptacle (2).







Installation:
Slide sleeve (1) over locking pin (2).

Make sure sleeve (1) is correctly engaged in cover housing (3).







Replacement:
Release screws (1).

Disengage emergency actuation pull strap (2) from retainer (5) and remove towards front.

If necessary, unclip locking pin (3) in direction of arrow from servodrive for tank filler flap (4).