65 12 071 Removing and Installing/Replacing Amplifier

65 12 071 Removing And Installing/Replacing Amplifier







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).







NOTE: Comply with notes and instructions on handling optical fibres.







Necessary preliminary work:
- Disconnect negative battery cable







Remove lid of left luggage compartment trim panel (1).

Remove luggage compartment flap (2).

Installation note:
Make sure lid (1) and flap (2) are correctly seated.







Unscrew nuts (1).

Lift out expanding rivets (2).

Remove left shelf support (3).







Release screw (1).

Remove amplifier (4) including holder (2).

Unfasten plug connections (3) and disconnect.

Replacement:
Remove amplifier (4) including holder (3).







Installation note:
Tabs (1) must be correctly slid into guide (2).

Check that amplifier (3) is securely seated.







Replacement:
For vehicle with production date up to 09/2010, carry out conversion in the diagnosis system via path:
- Vehicle
- Conversions
- Conversion hi-fi system

NOTE: On vehicle with production date after 09/2010, no vehicle programming / encoding needs to be carried out.