61 31 233 Removing and Installing/Replacing Engine Electrics For Lane Departure Warning

61 31 233 Removing And Installing/Renewing Lane Departure Warning Engine Electrical System (TLC Actuator)







Necessary preliminary tasks:
- Remove airbag unit
- Remove lower steering wheel trim







Disconnect plug connection (1).

Release screws (2) and remove engine electrical system (3).

Tightening torque 32 33 2AZ.

Installation:
Replace screws (2).

Ensure correct cable routing.







Replacement from build date 03/2009:
Engine electrical system must be readjusted.

The service module "Adjustment actuator Lane Departure Warning" can be found at:
- Body
- Camera-based driver support systems
- Adjustment actuator Lane Departure Warning