26 11 051 Replacing Flexible Disk For Front Propeller Shaft

26 11 051 Replacing flexible disc for front propeller shaft







Necessary preliminary tasks:
- Remove propeller shaft from transmission and centre mount

NOTE: To protect universal joints, tie back propeller shaft in area of centre mount.







Release screws and remove flexible disc (1) from propeller shaft.

IMPORTANT: Replace shiny ZNS bolts and self-locking nuts.

Tightening torque and angle of rotation: 26 11 1AZ.

Installation note:
- Arrows (3) on circumference of flexible disc must point to flange arms (2).
- Grip mounting bolts of flexible disc at propeller shaft flange at nuts and tighten down at bolt heads.







Installation note:
Check centring mount.
Replace damaged centring mount.

Grease centring mount.

lo3+��3+��3+:

4+�L4+: