33 11 151 Replacing Shaft Seal For Drive Flange Left or Right

33 11 151 Replacing shaft seal for drive flange left or right

Special tools required:







Necessary preliminary tasks:
- Remove drive flange on the rear axle final drive.
- If necessary, press of dust plate.







Use special tools 00 5 010 and 32 1 060 / 33 1 308 to remove radial shaft seal







Coat housing sheet metal flange and sealing lips of new radial shaft seal with approved final drive oil.
Drive in new radial shaft seal with following special tools (depending on rear axle final drive/outer diameter) until limit position.
00 5 500 + 33 3 400: 168K/L - 78x44x10
00 5 500 + 33 4 240: 188K/L/LW - 90x44x10
00 5 500 + 33 4 250: 215K/L/LW, 220K to 230K - 100x50x10
00 5 500 + 33 5 030: 210, 215 with lock - 76x50x10







After installation:
- Correct gearbox oil level/replace final drive oil.