72 11 098 Removing and Installing/Replacing All Rear Lower Belt Fittings

72 11 098 - Removing and installing/replacing all rear lower belt fittings





Warning!
Read and comply with safety regulations [1][2]Safety Regulations For Handling Components With Gas Generators for handling airbag modules and pyrotechnical belt tensioners.





Necessary preliminary tasks:
- Remove rear seat





Illustration show removal of the left lower belt fitting; proceed in the same way for the right fitting.
Release screw (1).
Tightening torque 72 11 23AZ [1][2]Seat Belt Systems.
Remove lower belt fitting (2).

Installation Note:
Pin (3) determines the installation position and prevents the lower belt fitting (2) from turning.

Note:
Middle lower belt fitting (4) can only be removed in conjunction with right lower belt fitting.





Lower belt fitting with belt tensioner:
Illustration show removal of the left lower belt fitting; proceed in the same way for the right fitting.
Unfasten plug connection 72 12 ... Unlocking/Locking Airbag Plug Connections (2) and disconnect.
Release screw (1).
Tightening torque 72 11 23AZ [1][2]Seat Belt Systems.
Remove lower belt fitting (3).

Installation Note:
Pin (4) determines the installation position and prevents the lower belt fitting (3) from turning.

Note:
Middle lower belt fitting (5) can only be removed in conjunction with right lower belt fitting.