Throttle Body: Service and Repair

13 54 030 Removing And Installing/Sealing Throttle Valve Assembly (N54, N54T)







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).







Necessary preliminary tasks:
- Switch off ignition.
- Remove charge air duct.







Unlock and disconnect line (1).
Unlock connector (2) and remove.
Release screws.

Tightening torque 13 54 1AZ.
Remove throttle body (3).







Installation note:
Replace sealing ring (1) of throttle body (2).







Installation note:
Check stored fault messages.
Delete fault memory.