51 34 211 Replacing Rubber Guide For Rear Left or Right Door Window

51 34 211 Replacing rubber guide for rear left or right door window







Special tools required:
- 00 9 317







IMPORTANT: The "Instructions on fitting window guide seals" serve as the basis for this repair instruction and must be observed without fail.







Necessary preliminary tasks:
- Remove cover on inside door window frame
- Release trim on window guide and slide downwards slightly, do not remove

E91 only:
- Remove trim on window frame at rear

NOTE: Window cavity cover strip does not have to be removed.







Lever out rubber guide (1) on door window frame at front (2) with special tool 00 9 317.







Pull rubber guide (1) out of window guide.
Detach rubber guide (1) in direction of arrow from door.







Installation:
Moisten rubber guide (2) prior to fitting with approved anti-friction agent.
Close door window glass (1) a little.
Push rubber guide (2) onto door window glass (1) and into window guide (3).