51 22 300 Removing and Installing/Replacing Window Cavity Cover Strip on Rear Door on Left or Right

51 22 300 Removing and installing/replacing window cavity cover strip on rear door on left or right







Special tools required:
- 00 9 324







IMPORTANT:
- Observe procedure for using special tool 00 9 324.
- The "Instructions on fitting window guide seals" serve as the basis for this repair instruction and must be observed without fail.







Necessary preliminary tasks:

E91 only:
- Remove trim on window frame at rear







IMPORTANT: If reusing the existing window cavity cover strip (1), make sure it is not bent.

Lever out window cavity cover strip (1) with special tool 00 9 324 (starting at B-pillar).
Feed window cavity cover strip (1) at rear out of guide (2).

Installation:
Moisten window cavity cover strip (1) prior to fitting with approved anti-friction agent.
Window cavity cover strip (1) must be flush at front and rear with door edge.







Version with Chromeline:

Installation:
If chrome strip (2) has been pulled out of cover strip (3), both parts must be reassembled.

Feed guide (1) of chrome strip (2) into groove (3) of window cavity cover strip (4).

Replacement:
Window cavity cover strip (4) and chrome strip (2) are replaced completely.