Replacing Backrest Cover For Left or Right Front Seat (Sport/Manual)

52 15 405 - Replacing backrest cover for left or right front seat (sport/manual)





Special tools required:
- 52 0 050 52 0 050 Pliers






Necessary preliminary tasks:
- Remove front seat Removing and Installing Left or Right Front Seat (Normal / Manual)
- Remove side airbag 72 12 050 Remove and Install Side Airbag in front seat
- Remove guide sleeves Replacing Guide Sleeves For Front Left or Right Head Restraint





Version with seat heating only:
Unfasten plug connection (1) and disconnect.
Disconnect cable straps.
Release wiring harness (3) from cable holders on seat mechanism.

Important!
Feed the wiring harness carefully through the seat and backrest mechanism as the edges of the frame can be sharp.





Detach backrest cover (1) from backrest frame.





Pull backrest cover (1) off Velcro-type fastener on backrest frame.





Pull off backrest cover (1) with padding sideways and towards top from backrest frame.





Release all retainers in marked area.
Remove backrest cover from padding.

Note:
Remove all remnants of retainers from backrest cover and padding.





Installation:
Bend new retainer (2) with special tool 52 0 050 52 0 050 Pliers.

1. Padding
2. Retainer
3. Trim thread in support
4. Trim wire in backrest cover
5. Back-rest cover





Replacement of backrest cover:
Pull trim threads out of backrest cover.
Cut new backrest cover to size and insert trim threads.