4BE3 - U0101 (DDE)

4BE3 - U0101

Information saved in
DDE

Fault code
4BE3 - U0101

Fault text
DDE: Message (transmission data, 0xBA): Message from
EGS failed

Fault description
The error is recognized when the message
GETRIEBEDATEN (TRANSMISSION DATA) is not
received.

Condition for fault identification
Test condition:
The following conditions must be satisfied:
- The message must be active.
- Terminal 15 must be active.
The signals are transmitted in cycles with a periodicity of 20
ms.
The error is checked in a 20 ms time grid.
Voltage condition:
The following conditions must be satisfied:
- The message must be active.
- Terminal 15 must be active.
The signals are transmitted in cycles with a periodicity of 20
ms.
The error is checked in a 20 ms time grid.

Condition for fault memory entry
Debounce (100 ms)

Action in service
Conduct CAN system analysis.

Fault effect and breakdown warning
-

Driver information
Warning light:
MIL

Service instruction
none