4BE2 - U0101 (DDE)

4BE2 - U0101

Information saved in
DDE

Fault code
4BE2 - U0101

Fault text
DDE: Message (transmission data, 0xBA): Signal(s) in
message not valid

Fault description
The error is recognized when at least one signal in the
message GETRIEBEDATEN (TRANSMISSION DATA) is
received with an error value.

Condition for fault identification
Test condition:
The following conditions must be satisfied:
- The message must be active.
- Terminal 15 must be active.
The signals are transmitted every 20 ms.
The error is checked in a 20 ms time grid.
Voltage condition:
The following conditions must be satisfied:
- The message must be active.
- Terminal 15 must be active.
The signals are transmitted every 20 ms.
The error is checked in a 20 ms time grid.

Condition for fault memory entry
Debounce (100 ms)

Action in service
Troubleshooting in transmitting control module.

Fault effect and breakdown warning
-

Driver information
Warning light:
MIL

Service instruction
none