4DF2

4DF2 - U0101

Information saved in
DDE

Fault code
4DF2 - U0101

Fault text
DDE: Message (torque transmission, 0xB5): Signal(s) in
message not valid

Fault description
The error is recognized when at least one signal in the
message DREHMOMENT_ANF_EGS is received with an
error value.

Condition for fault identification
Test condition:
The following conditions must be satisfied:
- The message must be active.
- Terminal 15 must be active.
The signals are transmitted every 20 ms.
The error is checked in a 20 ms time grid.
Voltage condition:
The following conditions must be satisfied:
- The message must be active.
- Terminal 15 must be active.
The signals are transmitted every 20 ms.
The error is checked in a 20 ms time grid.

Condition for fault memory entry
Debounce (50 ms)

Action in service
Troubleshooting in transmitting control module.

Fault effect and breakdown warning
-

Driver information
Warning light:
MIL

Service instruction
none