497B

497B - P110F

Information saved in
DDE

Fault code
497B - P110F

Fault text
Message (OBDSensDiag, 0x580-0x5FF ID2=140): Signal(s)
in message not valid

Fault description
The diagnostic trouble code is logged when at least one
signal for the DIENSTE (SERVICES) message is received
with an incorrect value.

Condition for fault identification
Test condition:
The following conditions must be satisfied:
- The message must be active.
- Terminal 15 must be active.
The signals are transmitted every 20 ms.
The error is checked in a 20 ms time grid.
Voltage condition:
The following conditions must be satisfied:
- The message must be active.
- Terminal 15 must be active.
The signals are transmitted every 20 ms.
The error is checked in a 20 ms time grid.

Condition for fault memory entry
Debounce (12000 ms)

Action in service
Troubleshooting in transmitting control module.

Fault effect and breakdown warning
-

Driver information
Warning light:
MIL

Service instruction
none