48CE

48CE - P0607

Information saved in
DDE

Fault code
48CE - P0607

Fault text
DDE: DDE control unit internal (ADC2): Analogue/digital
converter, voltage conversion takes too long

Fault description
Following successful calibration of the analog-digital
converter the A/D converter duration is checked. The
diagnostic trouble code is logged in the ECU if conversion
of all channels is not completed within a specified time.

Condition for fault identification
Test condition:
The converter check runs as part of the control module
initialization routine following calibration.
Voltage condition:
The converter check runs as part of the control module
initialization routine following calibration.

Condition for fault memory entry
No debouncing.None.

Action in service
Replace DDE control module.

Fault effect and breakdown warning
-

Driver information
Warning light:
MIL

Service instruction
none