51 22 330 Removing and Installing/Replacing Window Cavity Cover Strip on Inside Rear Door

51 22 330 - Removing and installing/replacing window cavity cover strip on inside rear door





Necessary preliminary tasks:
- Remove rear door trim panel Removing and Installing Left or Right Rear Door Trim Panel

Important!
The "Instructions on fitting window guide seals" serve as the basis for this repair instruction and must be observed without fail.





Pull window cavity cover strip at front (1) and rear (2) from rear door.

Installation:
If necessary, replace faulty retainers (3).
Moisten window cavity cover strips (1 and 2) prior to fitting with approved anti-friction agent.





Replacement with Security version:
Cut front window cavity cover strip to length on side of fixed door window glass to 533 mm.
Cut rear window cavity cover strip (1) to length on straight side (2) to measurement a = 153 mm.