25 16 056 Removing and Installing/Replacing Shift Tower (Steptronic)

25 16 056 - Removing and installing/replacing shift tower (AWD) (Steptronic)





Necessary preliminary tasks:
- Remove rear underbody protection.
- Remove centre console 51 16 200 Removing and Installing Storage Compartment.





Move selector lever to parking position "P".
Release screw (1).
Tightening torque 25 16 2AZ [1][2]Shifter A/T.
Remove clamp (2).
Release shift cable head (3) using a screwdriver from ball head of shift cable lever.

Installation Note:
Adjust selector lever Adjustments





Release screws (1).
Tightening torque: 25 16 3AZ [1][2]Shifter A/T.
Feed sleeve (2) out of body.
Lift shift tower out of centre console.






Installation:
Seal must not be damaged.