26 11 052 Replacing Flexible Disc For Rear Propeller Shaft

26 11 052 Replacing flexible disc for rear propeller shaft







Necessary preliminary tasks:
- Remove propeller shaft from rear axle final drive and centre mount

NOTE: To protect universal joints, tie back propeller shaft in area of centre mount.







Release screws and remove flexible disc (1) from propeller shaft.

IMPORTANT: Replace shiny ZNS bolts and self-locking nuts.

Tightening torque and angle of rotation: 26 11 1AZ .

Installation:
- Arrows (3) on circumference of flexible disc must point to flange arms (2).
- Grip mounting bolts of flexible disc at propeller shaft flange at nuts and tighten down at bolt heads.

lo3+��3+��3+:

4+�L4+:

�lG+I�G+��G+:

�H+CJH+:

��4+}�4+/ 5+:

U5+�5+: