Procedures

Replacing output stage/switch for heater A/C system blower

Remove air duct for right footwell. Service and Repair










Unhook linkage (2) in direction of arrow.
Release screw (1).

Installation:

Ensure that guide (3) is correctly seated.






Release screw (1).
Unhook holder for actuator drive (2).
Disconnect plug connection on actuator drive (3).







Disconnect plug connection (2).
Loosen screw (1).
Undo lock in direction of arrow and remove output stage/switch for heater
-A/C system blower (3).

Installation:

Ensure correct cable routing.