64 11 872 Removing and Installing/Replacing Servodrive For Blending Flap

64 11 872 Removing And Installing/replacing Actuator Drive For Blending Flap (left, Automatic Air Conditioning)







Necessary preliminary work:
- Remove trim for instrument panel at bottom left







Release screws (1).
Pull out actuator drive for blending flap (2).
Unlock plug connection (3) and disconnect.







Replacement:
Servomotors must be re-addressed in the event of replacement.
Addressing can only be carried out with the BMW diagnosis system.

Service functions:
- Body
- Heating and air conditioning function
- Flap motors
- Re-address flap motors