Oil Line: Service and Repair

17 22 030 - Removing and Installing/Replacing Oil Line For Engine Oil Cooler (N54)






Warning!
Danger of scalding!
Only perform this work after engine has cooled down.






Important!
Wear protective gloves and goggles.






Recycling:
Engine oil escapes when oil line is released.
Catch and dispose of emerging engine oil.
Observe country-specific waste-disposal regulations.






Necessary preliminary tasks:
- Remove fan cowl Service and Repair






Release screw.
Tightening torque 17 21 1AZ.
17 21 Engine Oil Cooler And Lines
00 00 Excerpt From Company Standard BMW GS 90003-2
Detach oil line (1) from oil filter control housing.
Catch and dispose of emerging engine oil.






Release screw (1).
Tightening torque 17 21 2AZ.
17 21 Engine Oil Cooler And Lines
00 00 Excerpt From Company Standard BMW GS 90003-2
Disconnect oil line (1) from engine oil cooler flange, feed out and remove.
Catch and dispose of emerging engine oil.






Installation Note:
Replace sealing rings on engine oil line.






Note:
After completing work, check engine oil level and top up engine oil if necessary.