Seal, Door Gap, Trim, B-Pillar

Grating Noise At the Door Gap Seal, B-Pillar Trim Panel

Repair instruction for 'grating noise at the door gap seal, B-pillar trim panel'

To localise the noise
- The adhesive tape from the previous check must not be removed.
- Use silicone remover to clean the trim panel of the front B-pillar and allow to air. Mask off the front B-pillar trim panel with adhesive tape. See Fig. 1.

Image 1







Attach the adhesive tape around the edge of the front B-pillar trim panel.
The door gap seal should be separated from the B-pillar trim panel.