Valve Housing For Left Or Right Front Lumbar support (normal/electric)

52 14 060 - Removing and installing/replacing valve housing for left or right front lumbar support (normal/electric)





Necessary preliminary tasks:
- Remove rear panel on front seat backrest





Remove valve housing in direction of arrow from backrest frame.

Installation:
Check that valve housing is correctly seated.





Unlock plug connection (3) and disconnect.
Unlock quick connectors and detach air hoses (1) and (2).
Valve unit for lumbar support:
1. Hose (clear) lumbar drive
2. Hose (blue/red), lumbar cushion

Installation:
Connections are coded against incorrect assembly.





Note:
Carry out function test Front Seat, Normal, Manual.