Fault Profiles, Telematics (TCU Telematic Control Unit)

Fault Patterns For Telematics (TCU Telematic Control Unit)

Fault patterns for Telematics
The following table lists the fault patterns covered in this test module.

Telematics
1 General malfunction when Assist services are used.
2 BMW Assist without function in the border zone.
3 The status bar still displays foreign network providers, even when far away from the border.
4 Initialization of the Telematic services cannot be started.
5 Initialization of the BMW Assist services can be selected, but the status bar shows no progress.
6 The data are not transferred for a BMW Assist call.
7 The position data are not transferred for a BMW Assist call or only transferred imprecisely.