Acceleration Sensor: Service and Repair

37 14 610 - Removing and installing / replacing transversal-acceleration sensor





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Important!
Do not kink floor panelling under any circumstances!





Necessary preliminary tasks:
- Remove right front seat
- Lift floor panelling and fold back to one side





Release screws (1).
Tightening torque 37 14 23AZ Electric Components.
Disconnect plug connection.





After installation:
- If necessary, carry out initial Dynamic Drive operation Initial Inspection and Diagnostic Overview