65 11 080 Removing and Installing/Replacing Radio Receiver

65 11 080 - Removing and installing/replacing radio receiver





Necessary preliminary tasks:
- Remove operator unit for heater/air conditioner 64 11 377 Removing and Installing/Replacing Heater/Air Conditioner Operator Unit (Version Without CCC/ASK)





Release screws (1).
Pull back radio receiver (2) slightly.
Disconnect associated plug connections and remove radio receiver (2).

Installation:
Make sure the rear guide pin of the radio receiver (2) is correctly seated in the associated mounting.





Replacement:
Carry out programming/coding Programming and Relearning.