Top - Window Frame

51 71 120 - Removing and installing/replacing cowl panel seal





Necessary preliminary tasks:
- If necessary, open soft top
- Remove trim strip on rain gutter on left and right





Fold back seal (1) at top to one side and release screw (2) underneath on both sides.

Installation:
Make sure seal (1) is correctly seated on trim (3) along dashed line.





Detach seal (1) along dashed line from window frame.

Installation:
If necessary, moisten seal (1) with water for better fitting.
Make sure seal (1) is correctly seated in retaining strip (2) and in area of arrows.