51 47 000 Removing and Installing/Replacing Front (Inside) Left or Right Entrance Cover Strip

51 47 000 Removing And Installing/Replacing Front (inside) Left Or Right Entrance Cover Strip







Disengage retaining lugs (5) of entrance cover strip (2) from both adjoining panels.

IMPORTANT: Carefully lever out entrance cover strip (2).

Lever out entrance cover strip (2) at front retaining points (3).
Pull back entrance cover strip (2) and feed out of rear retaining points (1).

Installation:
Position entrance cover strip (2) preinstalled with clips (4) on associated bores and clip into place.







Installation:
Clip mountings of entrance cover strip (2) must not be damaged.
Retaining lugs (3) of entrance cover strip (2) must not be damaged.
If necessary, lever out remaining clips (1) in floor panel.
If necessary, replace faulty clips (1).
Slide clips (1) into clip mountings of entrance cover strip (2).