Replacing Servomotor (ATC 400 X-Drive)

27 10 720 - Replacing servomotor (ATC 400 X-Drive)





Important!
After replacement, the "Repair" service function must be carried out with GT1.





Necessary preliminary tasks:
- Remove complete exhaust system Service and Repair.
- Remove heat shield.





Release screws and remove transmission cross-member.
Tightening torque 27 00 10AZ [1][2]Mechanical Specifications.





Disconnect plugs (1 and 2).
Release screws and remove servomotor from transfer box.
Tightening torque 27 00 13AZ [1][2]Mechanical Specifications.