Replacing Grooved Ball Bearings In Crankshaft

11 21 571 - Replacing grooved ball bearings in crankshaft (S85)





Special tools required:
- 00 5 500 00 5 500 Handle for Drifts
- 11 2 016 11 2 010 Extractor
- 11 2 340 11 2 340 Extractor
- 11 2 350 11 2 350 Drift





Necessary preliminary tasks:
- Remove transmission Removing and Installing Transmission (GS7S47BG SMG).
- Remove clutch 7 Speed.





Remove grooved ball bearing with special tool 11 2 340 11 2 340 Extractor in conjunction with special tool 11 2 016 11 2 010 Extractor.





Installation:
Replace guide bearing.

Drive in guide bearing as far as it will go with special tools 11 2 350 11 2 350 Drift and 00 5 500 00 5 500 Handle for Drifts.





Assemble engine.