51 71 373 - Removing and installing/replacing tension strut on spring strut dome

51 71 373 - Removing and installing/replacing tension strut on spring strut dome





Important!
Vehicles must not be driven without tension struts.
Driving without tension struts will result in bodywork damage.





Necessary preliminary tasks:
- Remove lower microfilter housing section Removing and Installing/Replacing Left or Right Microfilter Housing Lower Section on left/right





If necessary, remove cover on spring strut dome on left/right:
- Release expander rivets (1).
- Remove cover (3),
- taking care not to damage retaining lug (2)





If necessary, remove tension strut panels:
- Release expander rivets on panel (2)
- Remove panel (2) in direction of arrow





Important - modified screw connection!
Screws must be replaced and - because of the modified surface coating - tightened to increased torque!





Release screws (1).
Remove tension strut (2).

Installation Note:
Replace screws.
Tightening torque 51 61 1AZ [1][2]Specifications.