Removing and Installing Left Convertible Top Fastener

54 34 159 - Removing and installing left convertible top fastener





Necessary preliminary tasks:
- Remove cowl panel trim 54 34 127 Removing and installing/replacing cowl panel trim (convertible top fastener) (convertible top fastener)





Detach cable strap (2).
Lever out retaining ring and detach ball socket (3).

Note:
Do not misadjust control element.
If necessary, adjust (tension) control element Adjustments.

Left convertible top fastener only:

Unfasten plug connection (1) and disconnect.





Unfasten screws.

Installation:
Replace Torx screws and insert with Loctite.

Pull flex shaft (1) off drive.

Remove convertible top fastener.





Ideal adjustment:
Convertible top must close flush with cowl panel.
Observe gap dimensions .