Removing and Installing/Replacing Spray Nozzle for Night Vision Camera

61 67 200 - Removing and installing/replacing spray nozzle for night vision camera





Special tools required:
- 13 3 010 13 3 010 Hose Clip





Necessary preliminary tasks:
- Remove front bumper trim





To prevent excess escape of washer fluid, seal off end of high-pressure line with special tool 13 3 010 13 3 010 Hose Clip.





Note:
Night vision camera removed for purposes of clarity.

Press retainer (1) and detach high-pressure line (2) from high-pressure nozzle.





Release screws (1).
Remove high-pressure nozzle (2).

Installation:
New spray nozzles are already preset.
Check function.