Removing and Installing/Replacing Control Unit for Night Vision System

66 54 005 - Removing and installing/replacing control unit for Night Vision System





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Disconnect battery negative lead Disconnecting and Connecting Battery Negative Lead
- Remove trim for instrument panel on right 51 45 181 Removing and Installing/Replacing Bottom Right Trim For Instrument Panel





Disconnect plug connection (1).
Press tab (2) to side and remove control unit (3) from module carrier.





Replacement:
Carry out coding/programming Programming and Relearning.

Note:
New component contains a CD with deblocking code.
CD is requested during coding/programming by the SSS.