P2270

273A - P2270

Information saved in
DME

Fault code
273A - P2270

Fault text
Bank 1 post-catalyst oxygen sensor oscillation check

Fault description


Condition for fault identification
Test condition:
Active trim control (steady-state driving at between 2000
and 3000 rpm in part-load range ....min. 120 sec.)
Terminal condition: Engine running
Voltage condition:
none

Condition for fault memory entry
Trim control suspicion under consideration of P-component
or I-component leads to targeted rich control;
If the post-catalyst oxygen sensor signal fails to respond
accordingly the error is assigned to the post-catalyst oxygen
sensor.

Action in service
1. Check exhaust system for leaks
2. If OK, replace Bank 1 post-catalyst oxygen sensor

Fault effect and breakdown warning
MIL on after engine runs 2x / no effects on drivability

Driver information
Warning light:
No

Service instruction
none