2710 - P1606 (DME)

2710 - P1606

Information saved in
DME

Fault code
2710 - P1606

Fault text
Internal control module error

Fault description


Condition for fault identification
Test condition:
Processor communications OK
Terminal condition: Terminal 15
Voltage condition:
No

Condition for fault memory entry
DTC has been entered in ECU

Action in service
1. Delete stored DTCs from error memory,
2. if error is still present replace the DME.

Fault effect and breakdown warning
Check Control message / engine speed limitation 3500 rpm /
power reduction

Driver information
Warning light:
29-Engine malfunction

Service instruction
none